Actuators & Power]

Grid List

Showing all 9 results

$5.00

Brushless Fan 12V

Brushless Fan 12V
$5.00

Brushless Fan 12V

Brushless Fan 12V

Cooling Fan for general purposes
Dimension: 80*80*10mm/3.15*3.15*0.39inch (Approx.)
Cable Length: 230mm/9.06inch (Approx.)
Connector Type: 2 Pins(ph-2.54)
Voltage: DC 12V
Rated Current: 0.15A
Bearing Type: Sleeve
Speed: 2600RPM±10%

$2.00

DC Motor 3V

DC Motor 3V
$2.00

DC Motor 3V

DC Motor 3V

DC Motor used for general purposes – drive a load
Name:130 motor
Axial length:8mm
Diameter of axle:2mm
Specification:20*15*25mm
Rated voltage: 3V
No-load speed: 8000 r / min
Load current: 100mA
Stall Current: 0.7A
Weight: 17 grams

$7.00

L298n Motor Driver

L298n Motor Driver
$7.00

L298n Motor Driver

L298n Motor Driver

Based on the H Bridge circuit, this module can be used to control motors.
Logic voltage 5V
Drive voltage 5V-35V
Logic Current 0mA-36mA
Drive current 2A (MAX single bridge)
Storage Temperature -20 to 135
Maximum Power 25W
Weight 30g
External dimensions 43 * 43 * 27mm

$4.00

Logic level converter

Logic level converter
$4.00

Logic level converter

Logic level converter

In the case of translating between 3.3V and 5V system: VCCA connects to 3.3V power supply. VCCB connects to 5V power supplyGND connects to power negative pole respectively, the two power supply should be common-grounded with each otherWhen Ax has TTL 3.3V input, Bx will get TTL 5V outputWhen Bx has TTL 5V input, Ax will get TTL 3.3V outputNO direction control required
8 channels bidirectional voltage translation between different logic level, translate between Ax and Bx automatically Voltage level: 1.8V-6V

$10.00Add to cart

$10.00

Relay 4 Channel

Relay 4 Channel
$10.00

Relay 4 Channel

Relay 4 Channel

This is a 4 Channel 5V Relay interface board, which makes it possible to control various appliances, and other equipment with large current.
With indication LEDs. Standard interface that can be extended in a variety of development board. With fixed screw holes for easy installation
5 V & GND external
1N1-1N2 interchange relay control interface by single chip IO
Using a large current relay, AC250V 10A DC30V 10A
• Suitable for a variety of platforms 51/AVR/AVR/ARM

$10.00Add to cart

$9.50

Servo Motor MG90S

Servo Motor MG90S
$9.50

Servo Motor MG90S

Servo Motor MG90S

Servo motor with metal gear, same function as SG90 but with higher torque
Stall Torque: 13 kg / cm (4.8V), 15 kg / cm (6.0V).
Operating Speed: 0.17 sec/60¡ã (4.8V no load), 0.14 sec / 60¡ã (6.0V no load)
Operating voltage: 4.8 – 7.2V.
Dimension: 40mm x 19mm x 43mm.

$14.50Add to cart

$14.50

Servo Motor MG996R

Servo Motor MG996R
$14.50

Servo Motor MG996R

Servo Motor MG996R

This is essentially an upgraded version of the famous towerpro MG995 servo. It now has a redesigned PCB and IC controll system which makes it far more accurate. Its internal gearing and motor are also upgraded to improve dead bandwidth and centering.
Weight: 55g
Voltage: 4.8v / 6v
Speed: 0.20sec/60deg (4.8v) – 0.16sec/60deg (6v)
Torque: 9.4kg.cm (4.8v) – 11kg.cm (6v)
Gear Material: Metal
Gear Type: Digital
Motor: Brushless

$14.50Add to cart

$8.50

Servo Motor SG90

Servo Motor SG90
$8.50

Servo Motor SG90

Servo Motor SG90

Servo motors are great devices that can turn to a specified position. They have a servo arm that can turn 180 degrees. Arduino, we can command servo to go to a specified position and it will go there. As simple as that! Servo motors were first used in the Remote Control (RC) world, usually to control the steering of RC cars or the flaps on a RC plane. With time, they found their uses in robotics, automation, and of course, the Arduino world.
Dimension: 22 x 11.5x 22.5mm
Net Weight: 9 grams
Operating speed: 0.12second/ 60degree ( 4.8V no load)
Stall Torque (4.8V): 17.5oz /in (1kg/cm)
Temperature range: -30 to +60
Dead band width: 7usec
Operating voltage: 3.0V~7.2V
Fit for ALL kind of R/C Toys
Connector wire length 150mm

$12.00Add to cart

$12.00

Solenoid Valve

Solenoid Valve
$12.00

Solenoid Valve

Solenoid Valve

solenoid valve is an electromechanically operated valve. The valve is controlled by an electric current through a solenoid: in this case of a two-port valve the flow is switched on or off. It can be normally open or normally closed.
Voltage: 12V DC / 24V DC / 220V AC
Rated Power: 5W
Operation model : Normally closed (N/C)
Pressure: 0.02 – 0.8Mpa
Port size: G1/2”
Fluid temperature: 0-100 degrees Celsius
Usage: water and low viscosity fluids

$12.00Add to cart

WeCreativez WhatsApp Support
Our customer support team is here to answer your questions. Ask us anything!
👋 Hi, how can I help?