Development boards & Microcontrollers

Grid List

Showing all 14 results

$5.00

Acrylic Case /Enclosure

Acrylic Case /Enclosure
$5.00

Acrylic Case /Enclosure

Acrylic Case /Enclosure

1 x installation drawing
1 x R3 Acrylic Case Enclosure

$25.00Add to cart

$25.00

Arduino AT Mega 2560 R3

Arduino AT Mega 2560 R3
$25.00

Arduino AT Mega 2560 R3

Arduino AT Mega 2560 R3

Operating Voltage 5V
Input Voltage(recommended) 7-12V
Digital I/O Pins 54(of which 14 provide PWM output)
Analog Input Pins 16
DC Current per I/O Pin 40mA
Flash Memory 256KB
DC Current for 3.3 V Pin 50 mA

$25.00Add to cart

$15.00Add to cart

$15.00

Arduino Ethernet Shield

Arduino Ethernet Shield
$15.00

Arduino Ethernet Shield

Arduino Ethernet Shield

•Operating voltage 5V (supplied from the Arduino Board)
• Ethernet Controller: W5100 with internal 16K buffer
•Connection speed: 10/100Mb
• Connection with Arduino on SPI port

$15.00Add to cart

$9.00

Arduino Nano V3 CH340

Arduino Nano V3 CH340
$9.00

Arduino Nano V3 CH340

Arduino Nano V3 CH340

1. 20 digital input/output port RX and TX, D2 ~ D13, A0 ~ A5
2. 8 analog input port A0 ~ A7
3. 6 PWM port, D3, D5, D6, D9, D10, D11
4. Support serial download and ISP download
5. Support external 3.3V ~ 12V dc power supply

$9.00

Arduino Promini

Arduino Promini
$9.00

Arduino Promini

Arduino Promini

• ATmega328 running at 16MHz with external resonator (0.5% tolerance)
• USB connection off board
• Supports auto-reset
• Max 150mA output
• Over current protected
• Reverse polarity protected
• DC input 5V up to 12V
• On board Power and Status LEDs

$15.00Add to cart

$15.00

Arduino Uno R3 Mega 328p

Arduino Uno R3 Mega 328p
$15.00

Arduino Uno R3 Mega 328p

Arduino Uno R3 Mega 328p

Operating Voltage: 5V
Input Recommended Voltage: 5V – 9V (Max 12V)
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328)
length :68.6 mm
width :53.4 mm
weight : 25g

$15.00Add to cart

$8.00

ATMega 328p Chip

ATMega 328p Chip
$8.00

ATMega 328p Chip

ATMega 328p Chip

The Atmega328 is one of the microcontroller chips that are used with the popular Arduino Duemilanove boards. Of these 2, the Atmega328 is the upgraded, more advanced chip. Unlike the Atmega168 which has 16K of flash program memory and 512 bytes of internal SRAM, the Atmega328 has 32K of flash program memory and 2K of Internal SRAM.
Program Memory Type Flash
Program Memory (KB) 32
CPU Speed (MIPS) 20
RAM Bytes 2,048
Data EEPROM (bytes) 1024
Timers 2 x 8-bit, 1 x 16-bit
Temperature Range (C) -40 to 85
Operating Voltage Range (V) 1.8 to 5.5
Pin Count 32
Low Power Yes
Cap Touch Channels 16

$8.00

PIC Microcontrollers

PIC Microcontrollers
$8.00

PIC Microcontrollers

PIC Microcontrollers

The PIC Microcontroller is an electronic device that is easy-to-use in both hardware and software. Sensing the environment by receiving inputs from many sensors, PIC Microcontroller affects its surroundings by controlling lights, motors, and a number of other accessories. It’s intended for anyone making interactive hardware projects by connecting it with a power source, few leds and resistors. 16FXXXX series
40-pin Low Power Microcontroller
Flash Program Memory: 8192 bytes
EEPROM Data Memory: 256 bytes
SRAM Data Memory: 368 bytes
I/O Pins: 33
Timers: Two 8-bit / One 16-bit
A/D Converter: 10-bit Eight Channel
PWM: Two 10-bit Modules
SSP: SPI and I²C Support
USART: Yes
External Oscillator: up to 20MHz

$65.00Add to cart

$65.00

Raspberry Pi 2

Raspberry Pi 2
$65.00

Raspberry Pi 2

Raspberry Pi 2

oC: Broadcom BCM2836 (CPU, GPU, DSP, SDRAM)
CPU: 900 MHz quad-core ARM Cortex A7 (ARMv7 instruction set)
GPU: Broadcom VideoCore IV @ 250 MHz
More GPU info: OpenGL ES 2.0 (24
Memory: 1 GB (shared with GPU)
USB ports: 4

$65.00Add to cart

$80.00Add to cart

$80.00

Raspberry Pi 3B + charger

Raspberry Pi 3B + charger
$80.00

Raspberry Pi 3B + charger

Raspberry Pi 3B + charger

•Broadcom BCM2837 chipset running at 1.2 GHz
•64-bit quad-core ARM Cortex-A53
•802.11 b/g/n Wireless LAN
•Bluetooth 4.1 (Classic & Low Energy)
•Dual core Videocore IV® Multimedia co-processor
•1 GB LPDDR2 memory
•microSD card slot

$80.00Add to cart

$6.00

Raspberry Pi Case/Enclosure

Raspberry Pi Case/Enclosure
$6.00

Raspberry Pi Case/Enclosure

Raspberry Pi Case/Enclosure

1 x installation drawing
1 x R3 Acrylic Case Enclosure
Available in 3 colors

$65.00Add to cart

$65.00

Raspberry Pi Zero

Raspberry Pi Zero
$65.00

Raspberry Pi Zero

Raspberry Pi Zero

1GHz, Single-core CPU.
512MB RAM.
Mini HDMI and USB On-The-Go ports.
Micro USB power.
HAT-compatible 40-pin header.
Composite video and reset headers.
CSI camera connector.

$65.00Add to cart

$15.00Add to cart

$15.00

Universal Programmer Seat

Universal Programmer Seat
$15.00

Universal Programmer Seat

Universal Programmer Seat

Helps for easy PIC programming and installation
The seat supports the following programming microcontroller:
PIC16/18XX 40PIN Series devices (except 16F59)
PIC16/18XX 28PIN Series devices (except 16F57)
PIC16/18XX 18PIN Series devices
The PIC 8PIN/14PIN/20PIN family of devices (except 10FXX

$15.00Add to cart

$7.00

Wireless Transceiver NRF24L01

Wireless Transceiver NRF24L01
$7.00

Wireless Transceiver NRF24L01

Wireless Transceiver NRF24L01

Brand Name:RobotDynModel
Number:Mod-NRF24L01-SPISupply Voltage:3.3Vis_customized:YesCondition:NewApplication:RF transceiverType:RF transceiver

WeCreativez WhatsApp Support
Our customer support team is here to answer your questions. Ask us anything!
👋 Hi, how can I help?