Sensors

Grid List

Showing 1–16 of 25 results

$5.00

Adapter Converter Tssop28 DIP

Adapter Converter Tssop28 DIP
$5.00

Adapter Converter Tssop28 DIP

Adapter Converter Tssop28 DIP

The LCQT-TSSOP28 is a 35.56 x 17.78mm 28-TSSOP to 28-DIP quick turn small outline Prototyping Adapter which mates with TSSOP28 package to standard breadboard and breakout board for rapid and easy prototyping. This prototyping adapter is made of 1.58mm FR-4, approved by UL 94V-0 standard with 1/2oz Cu traces board. The pins are made of brass 360 1/2-hard as per UNS C36000 ASTM-B16-00 standard with Au flash finish and the pin is insulated with polyester as per UL 94V-0 standard.
SOP28/SSOP28/TSSOP28 0.65mm/1.27 mm to DIP adapter
Color: Green
Material: Glass Fiber FR4-side
Dimensions: 35 x 20 mm
Weight: 5 g

$12.00Add to cart

$12.00

Color Sensor Module

Color Sensor Module
$12.00

Color Sensor Module

Color Sensor Module

The TCS3200 sensor is a sensor which can detect any number of colours with right programming. This module contains RGB (Red Green Blue) arrays to give you the color in RGB format.
• Input voltage : DC 3V-5V
• Output frequency voltage : 0 ~ 5V
• Use bright white LED lights
• Can be connected directly with Microcontroller
• Static detection of the measured object color
Best detection distance : 10mm

$12.00Add to cart

$65.00Add to cart

$65.00

Finger Print Sensor

Finger Print Sensor
$65.00

Finger Print Sensor

Finger Print Sensor

Sensor perfect for e.g biometric projects or home automation and locking system
Embedded processor – ARM Cortex M3
Optical Sensor, 14 x 12.5mm
Image Size: 240 x 216 pixels
Resolution: 450 dpi
Supports up to 20 fingerprints
Identification: < 1.5 sec (20 fingerprints) Operating Voltage: 3.3-6V Operating Current: < 130mA

$65.00Add to cart

$12.00Add to cart

$12.00

Fluid flow sensor/ Water flow sensor

Fluid flow sensor/ Water flow sensor
$12.00

Fluid flow sensor/ Water flow sensor

Fluid flow sensor/ Water flow sensor

G1/2
High amplitude: ≥ 4.6V
Low amplitude: ≤ 0.5V
Electric strength: 1250V/min
Insulation resistance: ≥ 100MΩ
Hydrostatic pressure testing: ≤ 2.0Mpa

$12.00Add to cart

$75.00Add to cart

$75.00

Gas Sensor MG811 Carbon Dioxide/C02

Gas Sensor MG811 Carbon Dioxide/C02
$75.00

Gas Sensor MG811 Carbon Dioxide/C02

Gas Sensor MG811 Carbon Dioxide/C02

Net Weight: 16g; Package Content: 1 x Carbon Dioxide Sensor Module
Model: MG811 Voltage Probe; Working Voltage: DC 6V
Chip: LM393; Detect Density Range: 0-10000ppm
PCB

$75.00Add to cart

$6.00

Gas Sensor Mq 2

Gas Sensor Mq 2
$6.00

Gas Sensor Mq 2

Gas Sensor Mq 2

Working voltage: for DC 5V
Detection of gas: combustible gases, fumes
Detectable concentration :300-10000ppm (flammable gas)
Input voltage : DC5V Power consumption ( current ): 150mA

$6.00

Gas Sensor Mq3 Ethanol/Alcohol

Gas Sensor Mq3 Ethanol/Alcohol
$6.00

Gas Sensor Mq3 Ethanol/Alcohol

Gas Sensor Mq3 Ethanol/Alcohol

5V operation
Simple to use
LEDs for output and power
Output sensitivity adjustable
Analog output 0V to 5V
Digital output 0V or 5V

$6.00

Gas Sensor Mq6 LPG Propane/Butane

Gas Sensor Mq6 LPG Propane/Butane
$6.00

Gas Sensor Mq6 LPG Propane/Butane

Gas Sensor Mq6 LPG Propane/Butane

Voltage: 5V
Detecting concentration :
200-10000ppm LPG
iso-butane
propane
LNG
Analog and Digital Output
Digital Out is High or Low based on a adjustable preset threshold

$6.00

Gas Sensor Mq7 (carbon monoxide)

Gas Sensor Mq7 (carbon monoxide)
$6.00

Gas Sensor Mq7 (carbon monoxide)

Gas Sensor Mq7 (carbon monoxide)
$3.00

Hall Sensor

Hall Sensor
$3.00

Hall Sensor

Hall Sensor

Linear Hall magnetic module and a digital interface, built-in 13 LED build a simple circuit to produce a magnetic field warning lamp 13 comes with digital interfaces of the LED, the Hall sensor magnetometer access number 3 interface, when Hall magnetometer Sensor senses a key signal, LED lights, otherwise off.
Size: 2.7 cm x 1.4 cm
Main chip: LM393, 3144 Hall sensor
Working voltage: DC 5 V
Pinouts:
External 5V VCC
External GND
DO digital output interface (0 and 1)

$3.00

Infrared Transmitter and Receiver Module

Infrared Transmitter and Receiver Module
$3.00

Infrared Transmitter and Receiver Module

Infrared Transmitter and Receiver Module

– Operating voltage: 4.5 – 5.5VDC
– Operating Current: 50mA (max)
– Emission angle: 45 degrees
– SIG pin current: High level 0.4mA (max), low level 1.4mA (max)

$5.00

IR Obstacle Avoidance

IR Obstacle Avoidance
$5.00

IR Obstacle Avoidance

IR Obstacle Avoidance

This Infrared Obstacle Avoidance Sensors Module has a built-in IR transmitter and IR receiver that sends out IR waves and then looks for the reflected IR waves to detect the presence of any objects in front of the sensor module. The module has an on board potentiometer that let users adjust the detection range. This sensor can be used in light and complete darkness.
• There is an obstacle, the green indicator light on the circuit board
• Detection distance: 2 ~ 30cm
• Detection angle: 35 °
• Comparator chip: LM393
• 3mm screw holes for easy mounting

$4.00

IR Transmitter Module

IR Transmitter Module
$4.00

IR Transmitter Module

IR Transmitter Module

An infrared transmitter is simply a Light Emitting Diode which generates invisible IR light with a wavelength of between 1 mm and 750 nanometers, and some associated circuitry. In an infrared remote control, for example, pushing a button sends an electric signal to the LED, which converts the signal into a beam of infrared light. The receiving device detects the light with a photodiode and converts it to an electrical signal which, via an integrated circuit, controls its actions.
– Power Supply:3-5V
– Infrared center frequency:850nm-940nm
– Infrared emission angle: about 20degree
– Infrared emission distance: about 1.3m (5V 38Khz)
– Interface socket: JST PH2.0

$1.00

IR TSOP 1838 IR Receiver

IR TSOP 1838 IR Receiver
$1.00

IR TSOP 1838 IR Receiver

IR TSOP 1838 IR Receiver

IR (Infrared) sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V. To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to ground and listen on pin 1.
Carrier Frequency: 38kHz
Transmission Range: 45m
Directivity: 45°
Supply Voltage Min: 2.5V
Supply Voltage Max: 5.5V
Supply Current: 350μA
Operating Temperature Range:
-25°C to +85°C

$1.00

IR TSOP 4838 Receiver

IR TSOP 4838 Receiver
$1.00

IR TSOP 4838 Receiver

IR TSOP 4838 Receiver

IR (Infrared) sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V. To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to ground and listen on pin 1. It doesn’t do any decoding of the signal, just passes the ‘raw data’ along
Carrier Frequency: 38kHz
Transmission Range: 45m
Directivity: 45°
Supply Voltage Min: 2.5V
Supply Voltage Max: 5.5V
Supply Current: 350μA

$5.00

Motion Sensor HC SR501

Motion Sensor HC SR501
$5.00

Motion Sensor HC SR501

Motion Sensor HC SR501

Dimension: 3.2cm x 2.4cm x 1.8cm (approx)
Working Voltage Range: DC 4.5V- 20V
Current drain:<60uA
Voltage Output: High/Low level signal:3.3V TTL output
Detection distance: 3–7M (can be adjusted)
Detection range: <140°)

WeCreativez WhatsApp Support
Our customer support team is here to answer your questions. Ask us anything!
👋 Hi, how can I help?