Wireless & Communication

Grid List

Showing all 15 results

$11.00Add to cart

$11.00

Bluetooth Module HC- 05

Bluetooth Module HC- 05
$11.00

Bluetooth Module HC- 05

Bluetooth Module HC- 05

HC‐05 module is an easy to use Bluetooth SPP (Serial Port Protocol) module,designed for transparent wireless serial connection setup.The HC-05 Bluetooth Module can be used in a Master or Slave configuration, making it a great solution for wireless communication.This serial port bluetooth module is fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband.) • Typical ‐80dBm sensitivity. • Up to +4dBm RF transmit power. • 3.3 to 5 V I/O. • PIO (Programmable Input/Output) control. • UART interface with programmable baud rate. • With integrated antenna. • With edge connector.

$11.00Add to cart

$11.00Add to cart

$11.00

Bluetooth Module HC- 06

Bluetooth Module HC- 06
$11.00

Bluetooth Module HC- 06

Bluetooth Module HC- 06

The HC-05 or HC-06 Bluetooth Module (Master/Slave) provides a wireless communication link between your Arduino and any bluetooth capable device. It’s ideal replacement to your wired serial connection. It enables a circuit to communicate to another circuit through wireless connectivity. Sending and Receiving of data can be achieved within a range of 10 meters.
The module board has signal conditioning circuit (3.3V compatible) to easily connect the signal pins directly to Arduino boards or any 5V powered device.
Recommended: 3.3V, use potential divider

$11.00Add to cart

$22.00Add to cart

$22.00

GPS Module GY-Neo 6/Neo7 MV2

GPS Module GY-Neo 6/Neo7 MV2
$22.00

GPS Module GY-Neo 6/Neo7 MV2

GPS Module GY-Neo 6/Neo7 MV2

The NEO-6/7 module series is a family of stand-alone GPS receivers featuring the high-performance u-blox 6/7 positioning engine. These flexible and cost-effective receivers offer numerous connectivity options in a miniature 16 x 12.2 x 2.4 mm package. Used for position tracking.
Power Supply Range: 3 V to 5 V
Model: GY-GPS6MV2, Ceramic antenna
EEPROM for saving the configuration data when powered off. Backup battery
LED signal indicator
Antenna Size: 25 x 25 mm
Module Size: 25 x 35 mm
Mounting Hole Diameter: 3 mm
Default Baud Rate: 9600 bps

$22.00Add to cart

$22.00Add to cart

$22.00

GSM/GPRS Module A6 GSM

GSM/GPRS Module A6 GSM
$22.00

GSM/GPRS Module A6 GSM

GSM/GPRS Module A6 GSM

Send and receive SMS
Integrate well with various microcontrollers
Operating temperature -30 ℃ to + 80 ℃;
1KG peak suction
Low standby current
Operating Voltage 3.3V-4.2V;
Power voltage> 3.4V;
Standby average current 3ma less;
Support the GSM / GPRS four bands, including 850,900,1800,1900MHZ

$22.00Add to cart

$22.00Add to cart

$22.00

GSM/GPRS Module SIM 800L

GSM/GPRS Module SIM 800L
$22.00

GSM/GPRS Module SIM 800L

GSM/GPRS Module SIM 800L

GSM/GPRS module is used to establish communication between a computer and a GSM-GPRS system. Global System for Mobile communication (GSM) is an architecture used for mobile communication in most of the countries. Global Packet Radio Service (GPRS) is an extension of GSM that enables higher data transmission rate
* Quad-band 850/900/1800/1900MHz
* GPRS multi-slot class 12/10
* GPRS mobile station class B
* Meet the GSM 2/2 Standard
* FM: Frequency range 76 ~ 109MHz, 50KHz tuning step
*Voltage: 3.7-4.2V

$22.00Add to cart

$55.00Add to cart

$55.00

GSM/GPRS Module SIM 808

GSM/GPRS Module SIM 808
$55.00

GSM/GPRS Module SIM 808

GSM/GPRS Module SIM 808

SIM808 module is a complete Quad-Band GSM/GPRS module which combines GPS technology for satellite navigation. The compact design which integrated GPRS and GPS in a SMT package will significantly save both time and costs for customers to develop GPS enabled applications. Featuring an industry-standard interface and GPS function, it allows variable assets to be tracked seamlessly at any location and anytime with signal coverage
Quad-band 850/900/1800/1900MHz
GPRS multi-slot class 12/10
GPRS mobile station class B
Compliant to GSM phase 2/2+
Class 4 (2 W @ 850/900MHz)
Class 1 (1 W @ 1800/1900MHz)
Bluetooth: compliant with 3.0+EDR
Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands)
Supply voltage range 3.4 ~ 4.4V

$55.00Add to cart

$45.00Add to cart

$45.00

GSM/GPRS Module SIM 900

GSM/GPRS Module SIM 900
$45.00

GSM/GPRS Module SIM 900

GSM/GPRS Module SIM 900

The GPRS Shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard.
Quad-Band 850 / 900/ 1800 / 1900 MHz – would work on GSM networks in all countries across the world.
Class 4 (2 W @ 850 / 900 MHz) Class 1 (1 W @ 1800 / 1900MHz) SIMCOM AT Commands. SMS Embedded TCP/UDP stack – allows you to upload data to a web server. RTC supported. Speaker and Headphone jacks Low power consumption – 1.5mA(sleep mode) Industrial Temperature Range – -40°C to +85 °C Size:8.5×5.7x2cm(approx)

$45.00Add to cart

$12.00Add to cart

$12.00

Radio Module TEA5767

Radio Module TEA5767
$12.00

Radio Module TEA5767

Radio Module TEA5767

Radio Communication,
This is an FM receiver circuit radio based on Philips TEA5767 digital radio-receiver module. The radio receiver uses I2C interface with Arduino UNO development board. The TEA5767 module offers such features as stereo or mono outputs, radio station scanning and signal strength indication.
power supply: 5V
Frequency range: 76-108MHZ
PCB size: 31*30mm
With reverse polarity protection diode
With power output filtering sensor
I2C bus communication
Multi capacitor combined filter
Blue LED power indicator
FM chip module TEA5767

$12.00Add to cart

$11.00Add to cart

$11.00

Radio Module Transmitter and Receiver Module

Radio Module Transmitter and Receiver Module
$11.00

Radio Module Transmitter and Receiver Module

Radio Module Transmitter and Receiver Module

Receiver module parameters
These RF modules are very popular among the Arduino tinkerers. The 433MHz is used on a wide variety of applications that require wireless control. These modules are very cheap and you can use them with any microcontroller (MCU).
Transmitter module parameters
• Product Model: MX-05V
• Operating voltage: DC5V
• Quiescent Current: 4mA
• Receiving frequency: 433.92MHZ
• Receiver sensitivity:-105DB
• Size: 30 * 14 * 7mm
• External antenna: 32CM

$11.00Add to cart

$21.00Add to cart

$21.00

Raspberry Pi Camera

Raspberry Pi Camera
$21.00

Raspberry Pi Camera

Raspberry Pi Camera

The Raspberry Pi Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data. Raspberry Pi NOT INCLUDED
Small board size: 25mm x 20mm x 9mm
A 5MP (2592×1944 pixels) Omnivision 5647 sensor in a fixed focus module
Support 1080p30, 720p60 and 640x480p60/90 video record
Documentation .pdf

$21.00Add to cart

$70.00Add to cart

$70.00

Sim908

Sim908
$70.00

Sim908

Sim908

SIM908 module is a complete Quad-Band GSM/GPRS module which combines GPS technology for satellite navigation. The compact design which integrated GPRS and GPS in a SMT package will significantly save both time and costs for customers to develop GPS enabled applications.Featuring an industry-standard interface and GPS function, it allows variable assets to be tracked seamlessly at any location and anytime with signal coverage
Quad-Band 850/900/1800/1900 MHz
GPRS multi-slot class 10
GPRS mobile station class B
Compliant to GSM phase 2/2+
Class 4 (2 W @850/900 MHz)
Class 1 (1 W @ 1800/1900MHz)
SIM application toolkit
Supply voltage range:
GPRS: 3.2 ~ 4.8 V
GPS: 3.0 ~ 4.5V
Operation temperature: -40°C to +85 °C

$70.00Add to cart

$45.00Add to cart

$45.00

Speech/Voice Recognition Module

Speech/Voice Recognition Module
$45.00

Speech/Voice Recognition Module

Speech/Voice Recognition Module

1.Voltage: 4.5-5.5V
2.Current: <40mA
3.Digital Interface: 5V TTL level UART interface
4.Analog Interface: 3.5mm mono-channel microphone connector + microphone pin interface
5.Size: 30mm x 47.5mm

$45.00Add to cart

$14.00Add to cart

$14.00

WiFi Module ESP8266

WiFi Module ESP8266
$14.00

WiFi Module ESP8266

WiFi Module ESP8266

The ESP8266 WiFi Module is a self-contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.
Architecture: Xtensa lx106
CPU frequency: 80MHz overclockable to 160MHz
Total RAM available: 96KB (part of it reserved for system)
Internal FlashROM: None
External FlashROM: code and data,

$14.00Add to cart

$9.50

Wireless Transceiver

Wireless Transceiver
$9.50

Wireless Transceiver

Wireless Transceiver

The nRF24L01 module is a highly integrated, ultra low power (ULP) 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific and Medical) band. With peak RX/TX currents lower than 14mA, a sub μA power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01 provides a true ULP solution enabling months to years of battery lifetime when running on coin cells or AA/AAA batteries
Brand Name:RobotDynModel
Number:Mod-NRF24L01-SPISupply Voltage:3.3Vis_customized:YesCondition:NewApplication:RF transceiverType:RF transceiver

$45.00Add to cart

$45.00

Xbee Antenna Shield

Xbee Antenna Shield
$45.00

Xbee Antenna Shield

Xbee Antenna Shield

3.3V @ 40mA
250kbps Max data rate
2mW output (+ 3dBm)
400ft (120m) range
Built-in antenna
Fully FCC certified
6 10-bit ADC input pins
8 digital IO pins ,128-bit encryption

$45.00Add to cart

WeCreativez WhatsApp Support
Our customer support team is here to answer your questions. Ask us anything!
👋 Hi, how can I help?